Home :: IV Therapy :: Syringe Pumps :: Baxter AS50 Syringe Pump with Calibration Certificate

Baxter AS50 Syringe Pump with Calibration Certificate

The Auto Syringe AS 40 and AS50 infusion pumps provides accurate, continuous or intermittent infusion of intravenous solutions.
Infusion rates are programmable from 0.01 to 438 mL/hr.
The pump accepts standard disposable syringes from 1 mL to 60 mL in size.

While the pump is running, the status display shows information about the infusion. Safety and effectiveness are reinforced by re-programmable bolus operation, titration of a dose without interruption of fluid flow.
The pump includes an optional serial communication feature, which provides remote computer control and monitoring capabilities. A standard 9-pin connector allows an RS-232 communication link between the pump and the host computer.

Baxter AS50 Syringe Pump

Product Specifications

Dimensions:
Approx. 3.4"W x 2.6"D x 10"H

Weight:
Approx. 3.2 lbs.

Flow Rate Accuracy:
± 3% of full scale plunger travel (not including syringe tolerance)

Volume Accuracy:
± 3%, or 0.007" of travel, whichever is greater (not including syringe tolerance)

Syringes:
B-D: 1, 3, 5, 10, 20, 30, 60 mL plastic
Monoject: 1, 3, 6, 12, 20, 35, 60 mL
Terumo: 1, 3, 5, 10, 20, 30, 60 mL

Flow Rate Range:
0.01 mL/hr to 438 mL/hr, depending on the syringe

Delivery Volume:
Full syringe volume for 1-60 mL syringes

Data Display:
Self-prompting, multi-field LCD (Liquid Crystal Display)

Status Display:
Nine-LED (Light Emitting Diode) array

Power Requirements:
AC: 105-125V 60 Hz (battery charger)
DC: internal rechargeable battery pack

Battery Operating Time:
5 hours of operation at 100 mL/hr, or 12 hours of operation at 2 mL/hr using a 60 mL syringe, following a charge of not less than 16 hours.